ArchiTech
Series
AT-6
AT-2x6
AT-8
AT-10
AT-12
ATS-8 SUB
ATS-12 SUB
ATS-15 SUB
Performing
Musician
Series
PM-10
PM-15
PMS-15
Line Array
SpiraTech
Series
AR-208
AR-210
AR-215
ARS-215 SUB
ARS-218 SUB
ARSO-215 SUB

AT Series • AT-6
2-Way, 6.5"
Fixed installation System

Characteristics
"Uni-Block" unit designed for use in High Level indoor installations.
Wide Vertical and Horizontal coverage High-Frequencies Horns for perfect dispersion in the coverage area.
Passive filter, which optimises the critical voice zone response.
Steel front grille with acoustic foam.
Installation ready with inserted nuts on the base and the back panels.
The specific electronic controller guarantees: linear performance, powerful bass response, reliability.
Applications

Fixed Installation in Bars, Lounges, Shops, Theatres, Conference Rooms, etc.
Near field monitoring.
When used together with the series' Sub-woofers ATS-8; ATS-12; ATS-15 the system becomes a performing set-up for small events.
Specifications and Characteristics
Frequency Range (Hz)1 ±10dB  50Hz - 20KHz
Frequency Response (Hz)1 ±3dB  70Hz - 18KHz
Nominal Impedance 8 Ohm
Power Rating
(RMS)2  60W
Program2 120W
Peak2 240W
Horizontal Coverage (-6dB) 120º
Vertical Coverage (-6dB) 60º
Sensitivity (dB/1w@1m) 87dB SPL
SPL Max./Peak (dB SPL@1m) 3 110dB SPL
Connectors  Doubled pressure connector 
Recommended Signal Processor RAM Audio LMS 221 Processor
Recommended Power Amplifier 80W to 200W / 8 Ohm
Recommended Sub-woofer SPACE ATS-8; ATS-12; ATS-15
Enclosure and Installation
Enclosure Vertical "Uni-Block", single body, 10mm thick cross ply construction, tongue and groove assembly throughout.
Bi-component epoxy finish.
Protection Grille 1mm laminated steel with textured epoxy finish. Acoustic foam.
Dimensions (WxDxH) 195 x 215 x 316 mm
7.7 x 8.5 x 12.4 in
Net Weight 3.8 Kg
8.4 pounds
Installation System "Varifix" ready with inserted nuts in back and bottom.
Notes
1 Specifications in half space (with processor) 
2 With filtered Pink Noise 6dB crest-factor
3 Calculated from the Sensitivity and Power Data
Download pdf info file
The AT-6 Unit is a compact system, able to reproduce musical and speech programmes with an unusual fidelity compared with similar size cabinets.

It is structurally constructed from a single piece of pre-formed, rounded multi-ply shell, without any joint in its main body. This shape offers a clear reproduction of music without unwanted vibrations and acoustic colouring found in other materials.

It has been designed as a two-way passive system, in a "Uni-Block" concept, performing flawlessly as a high level music system, as well as a speech reproduction system in an emergency paging installation.

It is equipped with a Wide Directivity High-Frequencies Horn that gives the cabinet a brilliant and pleasant character, achieving a balanced response throughout its wide coverage field.

The AT-6 can be used on its own without any electronics processing, but has been conceived right from the start and following the current tendencies, to obtain its full musical expression capabilities, through the use of a specific signal processor. Thus, the AT-6 is able to reproduce the deepest bass with utmost purity, expression and reliability.

When coupled to one of the Subs available in the Series, (ATS-8;ATS-12; ATS-15), the AT-6 can be used as a small sound reinforcement system, able to generate punchy, clean and vigorous sound pressure levels.


construction detail