AT Series
• AT-12
2-Way, 12",
Fixed installation System
|
|
Characteristics
|
 |
"Uni-Block" unit designed for use in High Level indoor Installations. |
|
Wide Vertical and Horizontal coverage High-Frequencies Horn for perfect dispersion in the coverage area. |
|
Passive filter, which
optimises the critical voice zone response. |
|
Steel front grille with acoustic foam. |
|
Installation ready with inserted nuts on the back panel. |
|
The specific electronic controller guarantees: linear performance, powerful bass response, reliability. |
| Applications |
|
|
Fixed Installation in Bars, Lounges, Shops, Theatres, Conference Rooms, etc. |
|
Medium field monitoring. |
|
When used together with the series' Sub-woofers
ATS-15, the system becomes a performing set-up for small events. |
| Specifications and Characteristics |
| Frequency
Range (Hz)1 |
±10dB
40Hz - 20KHz |
| Frequency
Response (Hz)1 |
±3dB
68Hz - 18KHz |
| Nominal Impedance |
8 Ohm |
| Power Rating |
|
| (RMS)2 |
200W |
| Program2 |
400W |
| Peak2 |
800W |
| Horizontal Coverage |
(-6dB) 90º |
| Vertical Coverage |
(-6dB) 40º |
| Sensitivity
(dB/1w@1m) |
93dB SPL |
| SPL
Max./Peak (dB SPL@1m)3 |
131dB SPL |
| Connectors |
Doubled pressure connector |
| Recommended Signal
Processor |
RAM Audio
LMS 221 Processor |
| Recommended Power Amplifier |
300W / 600W @ 8 Ohm |
| Recommended Sub-woofer |
SPACE
ATS-15 |
| Enclosure and Installation |
| Enclosure |
Vertical "Uni-Block", single body,
15mm thick cross ply construction, tongue and groove
assembly throughout.
Bi-component epoxy finish. |
| Protection Grille |
1mm
laminated steel with textured epoxy finish. Acoustic foam. |
| Dimensions
(WxDxH) |
360
x 404 x 660 mm
14.2 x 15.9 x 26 in |
| Net Weight |
15.2
Kg
33.5 Pounds |
| Installation System |
"Varifix" ready with inserted nuts in
the back panel. |
|
| Notes |
|
1
Specifications in half space (with processor)
2
With filtered Pink Noise 6dB
crest-factor
3
Calculated from the Sensitivity and
Power Data |
|
|
|
Download pdf info file |
|
|
The AT-12 Unit is a compact system, able to reproduce musical and speech programmes with an unusual fidelity and extended bass response, when compared with similar size cabinets.
It is structurally constructed from a single piece of pre-formed, rounded multi-ply shell, without any joint in its main body. This shape offers a clear reproduction of music without unwanted vibrations and acoustic colouring found in other materials.
It has been designed as a two-way passive system, in a "Uni-Block" concept, performing flawlessly as a high-level music system, as well as a speech reproduction system in an emergency paging installation.
It is equipped with a Wide Directivity High-Frequencies Horn that gives the cabinet a brilliant and pleasant character, achieving a balanced response throughout its wide coverage field.
The AT-12 can be used on its own without any electronics processing, but has been conceived right from the start and following the current tendencies, to obtain its full musical expression capabilities, through the use of a specific signal processor. Thus, the AT-12 is able to reproduce the deepest bass with utmost purity, expression and reliability.
When coupled to one of the Subs available in the Series
(ATS-15), the AT-12 can be used as a small sound reinforcement system, able to generate punchy, clean and vigorous sound pressure levels.
construction
detail
|
